Asgard (2)


Plug Type (?)
Voltage (?)


In Stock, Ships 1-3 Days






Asgard 2 is the next generation of one of the most popular headphone amps in the world, boasting higher performance and convenience features such as switchable gain and preamp outputs. It’s a versatile control center for your desktop system, ideal for most headphones from IEMs to orthos, and with pre outs for powered desktop speakers.

Significantly Improved Performance
We used what we learned in Mjolnir to significantly improve Asgard 2’s performance. A high-voltage, cascoded JFET gain stage feeds a high-current Class A MOSFET output section. The 80V rails on the gain stage allow us to reduce distortion, while retaining Asgard’s no-overall-feedback design in high-gain mode.

Additional Versatility: From IEMs to Orthos to Active Monitors
Asgard 2 offers two gain settings. The low-gain mode is perfect for high-sensitivity IEMs, while the high-gain mode is ideal for most other headphones, up to and including many orthodynamics. In addition, the preamp outputs can easily be connected to powered speakers, for a complete desktop system.

Designed and Built in California
By “designed and built in California" this is what we mean: the vast majority of the total production cost of Asgard 2—chassis, boards, transformers, assembly, etc—goes to US companies manufacturing in the US. Our chassis are made minutes from our facility. Our PCBs are done just over the hill from us, or done in NorCal. Our transformers are also made in California. You get the picture. 

5-Year Warranty
Asgard 2 is covered by a limited warranty that covers parts and labor for five years. That’s 5 years. Yes. FIVE. Which is up to 5X that of our competition, if you weren’t so hot at math. Note the marketing weasel-wording “up to.”

15-Day Satisfaction Guarantee
Try Asgard 2 in your own house for 15 days. If you don’t like it, simply send it back for a refund, minus a 5% transaction fee. Try spending 15 days in an audio store. They’ll kick you out. Unless you buy them donuts. Maybe.

Frequency Response: 20Hz-20Khz, -0.1db, 2Hz-400KHz, -3dB
Maximum Power, 32 ohms: 1.0W RMS per channel
Maximum Power, 50 ohms: 1.0W RMS per channel
Maximum Power, 300 ohms: 380mW RMS per channel
Maximum Power, 600 ohms: 190mW RMS per channel
THD: Less than 0.008%, 20Hz-20KHz, at 1V RMS, high gain mode (worst case)
IMD: Less than 0.010%, CCIF at 1V RMS, high gain mode (worst case)
SNR: More than 102db, unweighted, referenced to 1V RMS, in low gain mode
Crosstalk: Less than -72dB, 20Hz-20KHz
Output Impedance: Less than 2 ohms
Input Impedance: 100K ohms
Gain: High = 6 (15.6db) or Low = 1.5 (3.5db), via rear switch
Topology: Fully discrete, single-ended Class A with single voltage gain stage, no overall feedback in high gain mode, 12dB feedback in low gain mode
Protection: Standard muting relay for delayed turn-on and fast turn-off
Power Supply: Internal power transformer with 4 separate power supply rails and over 20,000uf of filter capacitance
Power Consumption: 30W
Size: 9 x 6 x 2.25”
Weight: 5 lbs

*All measurements made on a Stanford Research SR1+ Audio Analyzer

Wait a minute! You upgraded Asgard?
Yes. Change is the only constant in life, and all that.

I loved the original. Why’d you do that?
Because we hate you. No. Just kidding. Asgard was a great amp for its time, but time has moved on. More people want to run powered monitors on their desktops, which means preamp outputs are important. More people want to use custom IEMs, so switchable gain is important. And we learned so much in the development of Mjolnir, we really wanted to share.

So is this a circlotron?
Nope. It’s still a single-ended Class A amp. It retains all the essential character of what made an Asgard an Asgard. But it now has Mjolnir’s high-voltage trick with a cascoded JFET input stage. Running very high voltage is one way to linearize circuits without using negative feedback. Which means Asgard 2’s distortion performance is much better than the original Asgard. We also eliminated Asgard’s output coupling capacitors, so this amp is DC in, and DC out.

So does it sound different?
Yes, it does, but it retains Asgard’s relaxed, natural character, together with additional transparency and dynamics.

But I hear all amps sound the same!
That’s cool. We think you can get a good deal on a headphone amp from Amazon for like $39. Or just use your receiver outputs and save even more money.

I hear you are using terms like “no feedback” and “Class A” to baffle us with audiophile bullshit, what’s up with that?
It’s no different than using the terms “precision operational amplifier” or “capacitor coupled gain stage” when describing a circuit. Describing the Asgard as a “no overall feedback, Class A” amp is accurate and relevant. If you think this is a value judgment on other topologies, or that we’re trying to obfuscate and confuse, well, what can we say, other than there are a ton of other options out there?

Will Asgard 2 drive orthos?
Many of them, yes. The HiFiMan HE400 and HE500 do well with Asgard 2, as well as the Audeze LCD2. The popular Fostex T50RP mods (Mad Dog, Paradox) are also well-served by Asgard 2.

And IEMs?
Yes. We’ve tested extensively with IEMs, and Asgard 2’s is excellent for them, in low gain mode.

And other headphones?
Of course. It may be the only amp you ever need, unless you want to get into tubes, or balanced amps.

So can I leave my headphones plugged in all the time, or do I have to do the unplug-and replug thing every time I turn Asgard 2 off and on?
You can leave them plugged in all the time. Asgard 2 has a muting relay which delays output on first turn-on, and mutes the output on turn-off.

Does the volume control adjust the preamp outputs?

Can I turn off the headphone outs when I’m using the preamp outputs?
Plugging in headphones automatically disconnects the pre-outs.

How do I switch the gain?
There’s a toggle switch on the back of the amp.

What does Class A really mean?
For us, Class A means Class A—that is, the output stage is running its maximum current all the time. This is a real Class A amp, biased by a current source. It can never go out of Class A. Protip: running a Class A amp hard into a difficult load actually causes it to run cooler. Please note this is not an invitation to destroy your hearing. This is just a bit of trivia. We probably should be telling you to practice safe listening, use a condom, sign this disclaimer before you turn up Asgard 2, don’t use the lawnmower as a hedge trimmer, coffee is hot, blah blah, but we don’t roll that way.

So, this thing runs damn hot, like Asgard?
If by “damn hot” you mean 40-45 degrees C, then yes.

And you’re not concerned with that?
Nope. The entire chassis is a heat sink, and we’re running the outputs well within their safe operating area, even derating for the operational temperature. Sorry, some engineerese crept in there.

But it still runs hot!
And technically, that’s still not a question. If you want an amp that runs cold, it’s best to look elsewhere.

Secrets of Home Theater and High Fidelity
Chris Groppi

"Compared to the Headroom Ultra Desktop, I can clearly say I prefer the Schiit combo, even at less than ½ the asking price of the Headroom amp/DAC when you could still buy one new."

"I strongly suggest you listen to the Schiit Asgard 2 and Bifrost. They are truly excellent sounding components. In addition to sounding far more expensive than they are, they also look and feel more expensive than they are. That's a very hard combination to beat."


Read Full Review ->

Srajan Ebaen
“The Asgard’s general character recalls single-ended transistor efforts in the FirstWatt stable – highly resolved, grainless, fast, microdynamically responsive, well controlled in the bass but not fat or maximally profound, direct, well separated, capable of fine incision power and bite.”
“In short, Schiit’s Asgard is an incredibly auspicious/ambitious debut from two old foxes whose present business plan for this company caters to the audiophile middle class and its terminally frustrated blue collars.”

“Value: Given performance, build quality and boutique US manufacture, approaching the insane.” 

Read Full Review ->

Vade Forrester

 “I’m impressed that Schiit Audio can produce a headphone amplifier for $249 that sounds and looks as if it costs $1000. And you don’t have to order it from some unknown Chinese company on eBay and pray you’ll actually see something for your money. If you need a good headphone amplifier at a price that seems silly cheap, I suggest you rush your order directly to Schiit via their website, before they come to their senses and raise the price.”


Read Full Review ->

Steve Guttenberg

 “High-end audio can be a rather expensive hobby, but every now and then I stumble across something really amazing, that’s priced for the real world.”

“The first thing you notice about the Asgard’s sound is its clarity, so music seems remarkably alive and realistic. I’ve demoed “Birth,” an excellent-sounding film score on dozens and dozens of reviews, but the Asgard revealed unheard details in the music. The score was recorded at Abbey Road Studios, and I have never been more aware of the studio’s acoustic “space,” so I was virtually transported to the recording session.”

Read Full Review ->

Water Lily Acoustics
Kavi Alexander

Kavi Alexander of Water Lily Acoustics has had four of his recordings nominated for the Grammys, with two of them winning the award. He loves the Asgard amp and uses it along with the Audeze LCD-3 headphones as his monitoring tool. He feels that the Asgard amp is neutral and thus transparent.

Ramona Emerson

“Beautiful. Great price for refined construction and U.S.-made parts. Makes for a subtly better listening experience, by staying fuzz-free on even the most complex music. Awesome five-year warranty for parts.”

Bill Leebens

 “A newcomer to the headphone amp world is Schiit (!); industry veterans Mike Moffat and Jason Stoddard offer killer American-made amps for $249-$349. Couple them with phones from Grado, Sennheiser, Beyer, Audio-Technica or Denon, and you might never leave home again!”

Read Full Review ->

Jude Mansilla

“Long story short on the early impressions: the Asgard is, to my ears, much more than $249.00 worth of amp, in terms of sound quality and versatility.” 

Read Full Review ->

Upping the Ante: CNET's Take on the Asgard 2
Steve Guttenberg

"The original amp sounded great with full-size headphones, but didn't work so well with in-ear headphones, mostly because they usually have higher sensitivity and the old Asgard's background noise/hiss was audible. The Asgard 2 has no such problem; I used it with my Ultimate Ears and JH-Audio in-ear headphones and the amp was dead quiet."

"The '2 sounds clearer and bass firms up a bit, but the basic character of the sound is the same. Hey, it was good to start with, so I'm not complaining."

Read Full Review ->